#Blue dashlights for a 2005 chevy driver

What to do: There is a risk to occupant and other road users safety. The vehicle will still stop by using one hydraulic circuit, but for best braking performance, both circuits need to be working. The Chevy Equinox brake system consists of two hydraulic circuits. If either of these dash lights stay on, there’s a brake fault. If light continues to flash, have fault diagnosed and repaired as soon as possible.ĭescription: USA versions of the Chevrolet Equinox will use the BRAKE dashboard warning light, other regions may use the metric symbol with an exclamation point If light continues to flash, stop when possible and switch off engine for at least 10 seconds. Avoid heavy acceleration, reduce speed and avoid steep uphill climbs. Poor fuel quality may result on the MIL coming on as can a capless funnel adapter where the adapter has not been removed.įlashing: if MIL is flashing, (gasoline engines only) a fault has occurred that may cause damage to the emissions system, in particular the catalytic converter. Continual driving with the warning light on may increase fuel consumption and may result in the engine not running smoothly. What to do: Steady Light: Have vehicle serviced. On diesel versions of the Equinox, the sash warning light may also come on indicating a fault with the Diesel Exhaust Fluid (DEF) management system. If this light comes on when driving, a malfunction has been detected in emissions control. Immediately switch off any electrical accessories to conserve battery power as this may allow you to travel further.ĭescription: The malfunction indicator light (MIL) or check engine light as it’s also called is part of the Chevrolet Equinox emission control on-board diagnostic system. What to do: If the light comes on while driving, it’s highly likely that the battery power will drain and the engine will soon stop. Possible faults may include:ĭescription: The Chevrolet Equinox battery warning light is an indication that there’s a fault with the battery charging system / generator. What to do: To help avoid risk of injury during a collision, have system serviced as soon as possible. If the light fails to come on at all or comes on when driving, and electrical fault has been detected with the airbag system.

Either remove the load or buckle the seat belt.ĭescription: The Chevrolet Equinox airbag light should come on temporarily with ignition and go out. If a load is placed on the passenger seat, the seat belt reminder light will flash along with the chime. What to do: Sensors are located in seats to detect vehicle occupants.

#Blue dashlights for a 2005 chevy driver

Turn on the heater to the hottest setting with the highest fan speed.ĭescription: When the engine is started, a driver and passenger seat belt reminder light will flash, along with a chime to remind vehicle occupants to fasten their belts.If temperature gauge is high, you have overheating message but no steam:

If no steam is coming from the engine, it’s usually not too serious. Check engine coolant levels and refill if required but first wait for engine to cool before removing cap – particularly if steam is coming from the engine – high chance of scolding. If the cooling fan is not running, do not continue to run the engine. Lift the hood to check that the engine cooling fan is working. What to do: Stop as soon as possible on a level surface and switch off the engine. Each symbol meaning is explained along with what action to take based on manufacturer recommendations.ĭescription: If the engine coolant warning light or the temperature gauge high along with an overheat message on the Chevrolet Equinox Driver Information Center. These are the Chevrolet Equinox dash warning lights and symbols. If a warning light comes on your Chevrolet Equinox dash while driving, check below to see what the symbol means and what you should do. This indicates that the system is working. Many warning lights come on when the engine has started.

Warning lights are used to signal the driver that something has been switched on (blue or green symbols), that something has been switched off (when it’s usually on by default) or a non-critical fault/ maintenance issue has been detected (amber / yellow symbols) or that a urgent or critical fault has been detected (red symbols).Īcting immediately to a dashboard warning light may prevent a serious and expensive repair and in some cases may prevent injury.